Search

The 7075 Aluminum Main Blade Grip With Thrust Bearing/Titanium Ball is specifically designed for improvements in stability, durability and overall performance on the BLADE 180 CFX / 150 S  helicopter.  The new design is CNC machined from Aluminum 7075, Titanium and Brass for long time use. With the addition of Thrust Bearing..

The 7075 Aluminum Main Blade Grip With Thrust Bearing/Titanium Ball is specifically designed for improvements in stability, durability and overall performance on the BLADE 180 CFX / 150 S  helicopter.  The new design is CNC machined from Aluminum 7075, Titanium and Brass for long time use. With the addition of Thrust Bearing..

The 7075 Aluminum Main Blade Grip With Thrust Bearing/Titanium Ball is specifically designed for improvements in stability, durability and overall performance on the BLADE 180 CFX / 150 S  helicopter.  The new design is CNC machined from Aluminum 7075, Titanium and Brass for long time use. With the addition of Thrust Bearing..

The 7075 Aluminum Main Blade Grip With Thrust Bearing/Titanium Ball is specifically designed for improvements in stability, durability and overall performance on the BLADE 180 CFX / 150 S  helicopter.  The new design is CNC machined from Aluminum 7075, Titanium and Brass for long time use. With the addition of Thrust Bearing..

The 7075 Aluminum Main Shaft Bearing Block is optimized for rigidity, stability, durability and overall performance on the Blade 180 CFX helicopter. The Main Shaft Bearing Block is CNC machined from Aluminum 7075 utilizing more powerful and thicker Radial Bearings than the stock.     ..

The 7075 Aluminum Main Shaft Bearing Block is optimized for rigidity, stability, durability and overall performance on the BLADE 180 CFX / FUSION 180 / 150 S helicopter. The Main Shaft Bearing Block is CNC machined from Aluminum 7075 utilizing more powerful and thicker Radial Bearings than the stock.   &nbs..

The 7075 Aluminum Main Shaft Bearing Block is optimized for rigidity, stability, durability and overall performance on the BLADE 180 CFX / FUSION 180 / 150 S helicopter. The Main Shaft Bearing Block is CNC machined from Aluminum 7075 utilizing more powerful and thicker Radial Bearings than the stock.   &nbs..

The 7075 Aluminum Main Shaft Bearing Block is optimized for rigidity, stability, durability and overall performance on the BLADE 180 CFX / FUSION 180 / 150 S helicopter. The Main Shaft Bearing Block is CNC machined from Aluminum 7075 utilizing more powerful and thicker Radial Bearings than the stock.   &nbs..

The design of the Aluminum Main/Tail Drive Pulley set was to optimize for stability and durability of the Microheli Pulley/Timing Belt Conversion series: MH-18FX018B, MH-18FX118B, MH-18FX218B, MH-18FX318B, MH-18FX418B, MH-18FX018BX.     Includes 1 x Aluminum Main/Tail Drive Pul..

The design of the Aluminum Main Blade Grip with Thrust Bearing was to optimize for rigidity, stability, durability and overall performance of the BLADE 250 CFX / 230S / 230S V2 / Smart helicopter. It is directly replaced the stock plastic. The new upgrade product is designed with Thrust Bearing in the inner side of the Aluminum Main Blade Grip,..

The design of the Aluminum Main Blade Grip with Thrust Bearing was to optimize for rigidity, stability, durability and overall performance of the BLADE 180 CFX TRIO helicopter. It is directly replaced the stock plastic. The new upgrade product is designed with Thrust Bearing in the inner side of the Aluminum Main Blade Grip, to increase Spindle..

The design of the Aluminum Main Blade Grip with Thrust Bearing was to optimize for rigidity, stability, durability and overall performance of the BLADE 250 CFX / 230S / 230S V2 / Smart helicopter. It is directly replaced the stock plastic. The new upgrade product is designed with Thrust Bearing in the inner side of the Aluminum Main Blade Grip,..

..

The design of the Aluminum Main Blade Grip with Thrust Bearing was to optimize for rigidity, stability, durability and overall performance of the BLADE 180 CFX TRIO helicopter. It is directly replaced the stock plastic. The new upgrade product is designed with Thrust Bearing in the inner side of the Aluminum Main Blade Grip, to increase Spindle..

The design of the Aluminum Main Blade Grip with Thrust Bearing was to optimize for rigidity, stability, durability and overall performance of the BLADE 250 CFX / 230S / 230S V2 / Smart helicopter. It is directly replaced the stock plastic. The new upgrade product is designed with Thrust Bearing in the inner side of the Aluminum Main Blade Grip,..

..

The design of the Aluminum Main Blade Grip with Thrust Bearing was to optimize for rigidity, stability, durability and overall performance of the BLADE 180 CFX TRIO helicopter. It is directly replaced the stock plastic. The new upgrade product is designed with Thrust Bearing in the inner side of the Aluminum Main Blade Grip, to increase Spindle..

The design of the Aluminum Main Drive Pulley is optimized for rigidity and durability of the Microheli Aluminum Pulley with Timing Belt Conversion set - Blade 180 CFX from CNC Aluminum material.     Includes 1 x Aluminum Main Drive Pulley (BLACK)   ..

The design of the Aluminum Main Drive Pulley is optimized for rigidity and durability of the Microheli Aluminum Pulley with Timing Belt Conversion set - Blade 180 CFX from CNC Aluminum material.     Includes 1 x Aluminum Main Drive Pulley (GOLD)   ..

The design of the Aluminum Main Drive Pulley is optimized for rigidity and durability of the Microheli Aluminum Pulley with Timing Belt Conversion set - Blade 180 CFX from CNC Aluminum material.     Includes 1 x Aluminum Main Drive Pulley (RED)   ..

    Includes 1 x Aluminum Main Shaft Collar (GOLD)     Material Aluminum     Weight N/A   ..

    Includes 1 x Aluminum Main Shaft Collar (RED)     Material Aluminum     Weight N/A   ..

    Includes 1 x Aluminum Main Shaft Collar     Material Aluminum     Weight N/A   ..

Strength and balance are the top design criteria for the Carbon Fiber Main Blades 245mm. The Carbon Fiber Main Blades 245mm are specially designed with full Carbon Fiber, to provide a precisely balanced blade, fast cyclic response, flutter-free, wobble-free and lowest aerodynamic drag. More than that, this new upgraded product is very uniqu..

The Carbon Plastic Main Blade 155mm is machined from Plastic-reinforced Carbon material, which is much harder & robust than ordinary plastic. Under the same applied force, the ordinary blade is bent while the Carbon reinforced blade is still in straight. See & feel the difference & make it stand out from the crowd!   ..

..

..

..

The CNC Aluminum Tri-Blade Main Rotor With Button is designed with precise CNC tolerances and material strength, to optimize stability, durability, response &and overall performance of the BLADE 180 CFX / 150 S helicopter. The new design is based on high technical standards, to achieve maximum precision and long-term durability. A..

The CNC Aluminum Tri-Blade Main Rotor With Button is designed with precise CNC tolerances and material strength, to optimize stability, durability, response &and overall performance of the BLADE 180 CFX / 150 S helicopter. The new design is based on high technical standards, to achieve maximum precision and long-term durability. A..

..

The CNC Delrin Main Gear 104T 0.4M is specifically designed for improvements in stability, durability and overall performance on the BLADE 180 CFX / 150 S  helicopter. The Main Gear 104T 0.4M utilizes CNC machining to produce tight and accurate tolerances throughout the part from Delrin material. It is all optimized for weight, s..

The CNC Delrin Main Gear 140T 0.5M design was to optimize for stability, durability and overall performance of the Blade 230 S/ Blade 250 CFX helicopter. This new design utilizes high-end CNC machining, to produce tight and accurate tolerances throughout the part from Delrin material. The CNC Delrin Main Gear 140T 0.5..

The CNC Delrin Main Gear With Adjustable Hub set is specifically designed for improvements in stability, durability and overall performance on the BLADE 180 CFX / 150 S helicopter. The Main Gear With Adjustable Hub set utilizes CNC machining to produce tight and accurate tolerances throughout the part from Aluminum..

The CNC Delrin Main Gear With Adjustable Hub set is specifically designed for improvements in stability, durability and overall performance on the BLADE 180 CFX / 150 S helicopter. The Main Gear With Adjustable Hub set utilizes CNC machining to produce tight and accurate tolerances throughout the part from Aluminum..

The CNC Delrin Main Gear With Adjustable Hub set is specifically designed for improvements in stability, durability and overall performance on the BLADE 180 CFX / 150 S helicopter. The Main Gear With Adjustable Hub set utilizes CNC machining to produce tight and accurate tolerances throughout the part from Aluminum..

The CNC Delrin Main Gear With Adjustable Hub set is specifically designed for improvements in stability, durability and overall performance on the BLADE 180 CFX / 150 S helicopter. The Main Gear With Adjustable Hub set utilizes CNC machining to produce tight and accurate tolerances throughout the part from Aluminum..

The CNC Delrin Main Gear w/ Aluminum Hub set design was to optimize for stability, durability and overall performance of the Blade 250 CFX helicopter. It is directly replaced the stock plastic. This new design utilizes high-end CNC machining, to produce tight and accurate tolerances throughout the part, from Delrin and Aluminum materi..

The CNC Delrin Main Gear w/ Aluminum Hub set design was to optimize for stability, durability and overall performance of the Blade 250 CFX helicopter. It is directly replaced the stock plastic. This new design utilizes high-end CNC machining, to produce tight and accurate tolerances throughout the part, from Delrin and Aluminum materi..

The CNC Delrin Main Gear w/ Aluminum Hub set design was to optimize for stability, durability and overall performance of the Blade 250 CFX helicopter. It is directly replaced the stock plastic. This new design utilizes high-end CNC machining, to produce tight and accurate tolerances throughout the part, from Delrin and Aluminum materi..

..

The design of the Main Blade Grip Control Arm Set is optimized for rigidity and durability of the Microheli Precision CNC Aluminum DFC Head set - Blade 300 CFX (Product Code: MH-3CFX002DF), from aluminum, stainless steel and plastic materials.     Includes ..

The design of the Main Blade Grip Control Arm Set is optimized for rigidity and durability of the Microheli Precision CNC Aluminum DFC Head set - Blade 300 CFX (Product Code: MH-3CFX202DF), from aluminum, stainless steel and plastic materials.     Includes 1 x Main Bl..

The design of the Main Blade Grip Control Arm Set is optimized for rigidity and durability of the Microheli Precision CNC Aluminum DFC Head set - Blade 300 CFX (Product Code: MH-3CFX102DF), from aluminum, stainless steel and plastic materials.     Includes 1 x Main Bl..

The Main Blade Grip With Thrust Bearing/Titanium Ball is specifically designed for improvements in stability, durability and overall performance on the BLADE 180 CFX / 150 S helicopter. It is directly replaced the stock plastic components. This new upgrade product is CNC machined from Aluminum, Titanium and Brass materials f..

The Main Blade Grip With Thrust Bearing/Titanium Ball is specifically designed for improvements in stability, durability and overall performance on the BLADE 180 CFX / 150 S helicopter. It is directly replaced the stock plastic components. This new upgrade product is CNC machined from Aluminum, Titanium and Brass materials f..

The Main Blade Grip With Thrust Bearing/Titanium Ball is specifically designed for improvements in stability, durability and overall performance on the BLADE 180 CFX / 150 S helicopter. It is directly replaced the stock plastic components. This new upgrade product is CNC machined from Aluminum, Titanium and Brass materials f..

The Main Blade Grip With Thrust Bearing/Titanium Ball is specifically designed for improvements in stability, durability and overall performance on the BLADE 180 CFX / 150 S helicopter. It is directly replaced the stock plastic components. This new upgrade product is CNC machined from Aluminum, Titanium and Brass materials f..