Grid View:
 
 
Back Order
 
Back Order
 
 
 
Back Order
 
 
 

Carbon Fiber 3 Blade Propeller 65mm Tail Blade - OMP Hobby M2 V1 / V2 / EXP

MH-M2EX050C
(0)
$8.99

The Carbon Fiber 3 Blade Propeller 65mm Tail Blade is designed with 65mm tail blade length to provide snappy tail response. It will be your an integral part of your OMP Hobby M2 V1 / V2 / EXP helicopter, but it also has the benefits and performance increase to match.  Included: 1 x Carbon Fibe..

 

Carbon Fiber 3 Blade Propeller 70mm Tail Blade - OMP Hobby M2 V1 / V2 / EXP

MH-OM2050C
(0)
$9.99

The Carbon Fiber 3 Blade Propeller 70mm Tail Blade is designed with 70mm tail blade length to provide snappy tail response. It will be your an integral part of your OMP Hobby M2 V1 / V2 / EXP helicopter, but it also has the benefits and performance increase to match.  Included: 1 x Carbon Fibe..

 
Back Order
 
 

Airbrush Fiberglass Hughes 300 Scale /w Landing Gear - OMP Hobby M2 V2 / EXP

MH-M2EX-SH31
(0)
$79.99

The Airbrush Fiberglass Hughes 300 Scale design creates a super sharp overall appearance, which not only adds a cool new look to your OMP Hobby M2 V2 / EXP helicopter, but also significantly aids in high visibility from airbrush fiberglass shell. Included:1 x Airbrush Fiberglass Hughes 300 Scale2 x Aluminum Canopy Mount1 x ..

 
Back Order

Aluminum Canopy Mount Set (GOLD) - OMP HOBBY M1

MH-OMM1205CM
(0)
$8.99

Included: 2 x Aluminum Canopy Mount   Usage: Use for OMP Hobby M1    ..

 
 
Back Order

Aluminum Canopy Mount Set (RED) - OMP HOBBY M1

MH-OMM1105CM
(0)
$8.99

Included: 2 x Aluminum Canopy Mount   Usage: Use for OMP Hobby M1    ..

 
 
Back Order

Aluminum Canopy Mount Set - OMP HOBBY M1

MH-OMM1005CM
(0)
$8.99

Included: 2 x Aluminum Canopy Mount   Usage: Use for OMP Hobby M1    ..

 
 

Aluminum Carbon Fiber Tail Motor Mount W/ Fin Set (GOLD) - OMP Hobby M1

MH-OMM1225
(0)
$19.99

Included: 1 x Aluminum Carbon Fiber Tail Motor Mount W/ Fin Set   Weight: 1.44g   Usage: Use for OMP Hobby M1   Requires: Read and follow the Assembly Instruction carefully Loctite (#242 is recommended) is required to apply to all mechanical ..

 

Aluminum Carbon Fiber Tail Motor Mount W/ Fin Set (RED) - OMP Hobby M1

MH-OMM1125
(0)
$19.99

Included: 1 x Aluminum Carbon Fiber Tail Motor Mount W/ Fin Set   Weight: 1.44g   Usage: Use for OMP Hobby M1   Requires: Read and follow the Assembly Instruction carefully Loctite (#242 is recommended) is required to apply to all mechanical ..

 

Aluminum Carbon Fiber Tail Motor Mount W/ Fin Set - OMP Hobby M1

MH-OMM1025
(0)
$19.99

Included: 1 x Aluminum Carbon Fiber Tail Motor Mount W/ Fin Set   Weight: 1.44g   Usage: Use for OMP Hobby M1   Requires: Read and follow the Assembly Instruction carefully Loctite (#242 is recommended) is required to apply to all mechanical ..

 
 
 
 

Aluminum Main Blade Grip w/ Thrust Bearing (GOLD) - OMP Hobby M1

MH-OMM1202
(0)
$27.99

The design of the Aluminum Main Blade Grip with Thrust Bearing was to optimize for rigidity, stability, durability and overall performance of the OMP Hobby M1 helicopter. It is directly replaced the stock main blade grip. The new upgrade product is designed with Thrust Bearing in the inner side of the Aluminum Main Blade Grip, to increase S..

 

Aluminum Main Blade Grip w/ Thrust Bearing (GOLD) - OMP Hobby M2 V1/V2/EXP

MH-M2EX202
(0)
$24.99

The CNC Aluminum Main Blade Grip w/ Thrust Bearing is specifically designed for improvements in rigidity, stability, durability and overall performance on the OMP Hobby M2 V1 / V2 / EXP helicopter.The Main Blade Grip design utilizes the best CNC machining to produce tight and accurate tolerances throughout the part from Aluminum and Stain..

 

Aluminum Main Blade Grip w/ Thrust Bearing (RED) - OMP Hobby M1

MH-OMM1102
(0)
$27.99

The design of the Aluminum Main Blade Grip with Thrust Bearing was to optimize for rigidity, stability, durability and overall performance of the OMP Hobby M1 helicopter. It is directly replaced the stock main blade grip. The new upgrade product is designed with Thrust Bearing in the inner side of the Aluminum Main Blade Grip, to increase Spind..

 

Aluminum Main Blade Grip w/ Thrust Bearing (RED) - OMP Hobby M2 V1/V2/EXP

MH-M2EX102
(0)
$24.99

The CNC Aluminum Main Blade Grip w/ Thrust Bearing is specifically designed for improvements in rigidity, stability, durability and overall performance on the OMP Hobby M2 V1 / V2 / EXP helicopter.The Main Blade Grip design utilizes the best CNC machining to produce tight and accurate tolerances throughout the part from Aluminum and Stain..

 

Aluminum Main Blade Grip w/ Thrust Bearing - OMP Hobby M1

MH-OMM1002
(0)
$27.99

The design of the Aluminum Main Blade Grip with Thrust Bearing was to optimize for rigidity, stability, durability and overall performance of the OMP Hobby M1 helicopter. It is directly replaced the stock main blade grip. The new upgrade product is designed with Thrust Bearing in the inner side of the Aluminum Main Blade Grip, to increase S..

 

Aluminum Main Blade Grip w/ Thrust Bearing - OMP Hobby M2 V1/V2/EXP

MH-M2EX002
(0)
$24.99

The CNC Aluminum Main Blade Grip w/ Thrust Bearing is specifically designed for improvements in rigidity, stability, durability and overall performance on the OMP Hobby M2 V1 / V2 / EXP helicopter.The Main Blade Grip design utilizes the best CNC machining to produce tight and accurate tolerances throughout the part from Aluminum and Stain..

 

Aluminum Tail Motor Mount (for MH-OMM1025 - OMP Hobby M1)

MH-OMM1025TM
(0)
$12.99

Included: 1 x Aluminum Tail Motor Mount   Weight: 0.72g   Usage: Use for MH-OMM1025   Requires: Read and follow the Assembly Instruction carefully Loctite (#242 is recommended) is required to apply to all mechanical screws for safety pre..

 

Aluminum Tail Motor Mount (GOLD)(for MH-OMM1225 - OMP Hobby M1)

MH-OMM1225TM
(0)
$12.99

Included: 1 x Aluminum Tail Motor Mount   Weight: 0.72g   Usage: Use for MH-OMM1225   Requires: Read and follow the Assembly Instruction carefully Loctite (#242 is recommended) is required to apply to all mechanical screws for safety pre..

 

Aluminum Tail Motor Mount (RED)(for MH-OMM1125 - OMP Hobby M1)

MH-OMM1125TM
(0)
$12.99

Included: 1 x Aluminum Tail Motor Mount   Weight: 0.72g   Usage: Use for MH-OMM1125   Requires: Read and follow the Assembly Instruction carefully Loctite (#242 is recommended) is required to apply to all mechanical screws for safety pre..

 
 
 
 
 
 
 
 
 
 
Back Order

Aluminum/Carbon Fiber Main Frame (GOLD) - OMP Hobby M2 V2 / EXP

MH-M2EX205
(0)
$75.99

The design of the Aluminum/Carbon Fiber Main Frame was to optimize for rigidity, stability, durability, and overall performance of the OMP Hobby M2 V2 / EXP. It is compatible and easily replaced the stock frame parts.The new upgraded product consists of incredibly strong 1.2mm Carbon Fiber plates, held together by the Aluminum parts&..

 
Back Order

Aluminum/Carbon Fiber Main Frame (RED) - OMP Hobby M2 V2 / EXP

MH-M2EX105
(0)
$75.99

The design of the Aluminum/Carbon Fiber Main Frame was to optimize for rigidity, stability, durability, and overall performance of the OMP Hobby M2 V2 / EXP. It is compatible and easily replaced the stock frame parts.The new upgraded product consists of incredibly strong 1.2mm Carbon Fiber plates, held together by the Aluminum parts&..

 
Back Order

Aluminum/Carbon Fiber Main Frame - OMP Hobby M2 V2 / EXP

MH-M2EX005
(0)
$75.99

The design of the Aluminum/Carbon Fiber Main Frame was to optimize for rigidity, stability, durability, and overall performance of the OMP Hobby M2 V2 / EXP. It is compatible and easily replaced the stock frame parts.The new upgraded product consists of incredibly strong 1.2mm Carbon Fiber plates, held together by the Aluminum parts&..

 
 
Showing 1 to 48 of 171 (4 Pages)