Search

The Adjustable Tail Motor Mount is specifically designed and optimized for improvements in rigidity, stability, durability and overall performance on the BLADE INFUSION 120 helicopter.With this Tail Motor Mount you can stretch out 4mm longer for more flying experience on your heli.Included:1 x Adjustable Tail Motor Mount w/ Fin ..

Rigidity, stability and durability with high technical standards are the top design criteria for the Advanced X Frame. This new design is fully equipped with high quality aluminum, carbon fiber and Delrin to form the best rigid block, without any issue with bend, vibe or wag during flight and optimize for minimum weight only 7.95g (0.48g lighte..

    Features 100% CNC machined from Aluminum, Carbon Fiber and Delrin Improvements in rigidity, stability, durability and overall performance on the WALKERA V120D02S helicopter ..

The Aluminum Tail Motor Mount is specifically designed with full CNC aluminum, to optimize for minimum weight (only 0.92g) and maximum strength on BLADE 120 S / S2 tail system. It is directly replaced the stock plastic. This new design has brought an extremely efficient and powerful upgrade product to the market, with the following ou..

The Aluminum/Carbon Fiber/Delrin Main Frame is specifically designed for improvements in rigidity, stability, durability and overall performance on the BLADE INFUSION 120 helicopter. The new upgrade product is an incredibly strong and virtually indestructible frame from the perfect combination of Aluminum, Carbon Fiber and Delrin ..

Featuring Microheli’s best designs, the CNC Triple Plastic Blades Conversion set is designed with material strength and precise CNC tolerances in mind, to optimize stability, durability, response and overall performance of the BLADE 120S / S2 helicopter. Every detail of this Conversion set was scrutinized in terms of lift forces and energy ..

Featuring Microheli’s best designs, the CNC Triple Plastic Blades Conversion set is designed with material strength and precise CNC tolerances in mind, to optimize stability, durability, response and overall performance of the BLADE 120S / S2 helicopter. Every detail of this Conversion set was scrutinized in terms of lift forces and energy ..

Featuring Microheli’s best designs, the CNC Triple Plastic Blades Conversion set is designed with material strength and precise CNC tolerances in mind, to optimize stability, durability, response and overall performance of the BLADE 120S / S2 helicopter. Every detail of this Conversion set was scrutinized in terms of lift forces and energy ..

    Includes 1 x CNC Aluminum 120mm OD 3mm Tail Boom (RED)     Material Aluminum     Weight 1.18g &nbs..

..

Includes: 1 CNC Aluminum Tail Motor Protective Sleeve Material:  Aluminum Usage: For MICROHELI Frame - Blade  120S / S2..

Featuring Microheli’s best designs, the CNC Triple Plastic Blades Conversion set is designed with material strength and precise CNC tolerances in mind, to optimize stability, durability, response and overall performance of the BLADE 120S / S2 helicopter. Every detail of this Conversion set was scrutinized in terms of lift forces and energy cons..

The CNC Performance package is specifically designed with material strength and precise CNC tolerances, to optimize for stability, durability, response and overall performance of the BLADE 120 S / S2 helicopter. With its stylish look, outstanding features and designs, precision CNC high-performance parts and more, get ready to experie..

The CNC Triple Blades Performance package is specifically designed with material strength and precise CNC tolerances, to optimize for stability, durability, response and overall performance of the BLADE 120 S / S2 helicopter. With its stylish look, outstanding features and designs, precision CNC high-performance parts and more, ge..

..

..

..

..

..

Includes: 1 Lower Bearing Hub and Hardwares Material: Aluminum Usage: For MICROHELI Frame - Blade 120S / S2..

Rigidity, stability and durability with high technical standards are the top design criteria for the Precision CNC Aluminum Main Blade Grip with Titanium Ball. This new design utilizes the best CNC machining, to produce tight and accurate tolerances throughout the part from aluminum, titanium and Delrin materials. More than that, with the ..

Precision CNC Hardened Steel Main Shaft w/ Collar set was to optimize for weight, stability and durability of the BLADE 120 S / S2 helicopter. The new upgrade product is equipped with aluminum and hardened steel, to produce tight and accurate tolerances throughout the part. Included:1 x Hardened Steel Main Shaft w/ Co..

Precision CNC Hardened Steel Main Shaft w/ Collar set was to optimize for weight, stability and durability of the BLADE INFUSION 120 helicopter. The new upgrade product is equipped with aluminum and hardened steel, to produce tight and accurate tolerances throughout the part. Included:1 x Hardened Steel Main Shaft w/ ..

The Precision CNC Power Package is specifically designed with material strength and precise CNC tolerances, to optimize for stability, durability, response and overall performance of the BLADE 120 S / S2 helicopter. With its stylish look, outstanding features and designs, precision CNC high-performance parts and more, get ready to..

The design of the Precision CNC Solid Carbon Main Shaft/Collar set was to optimize for weight, stability and durability of the BLADE 120 S / S2 helicopter. The new upgrade product is equipped with solid carbon, aluminum and stainless steel, to produce tight and accurate tolerances throughout the part.   &nb..

Rigidity, stability and durability with high technical standards are the top design criteria for the Precision CNC Titanium X Swashplate. This new upgrade product is equipped with Precision CNC titanium, aluminum and Delrin, with special design features for the BLADE 120 S / S2 Swashplate: -Utilizes the high quality selected Radia..

Includes: 1 Aluminum Tail Boom Mount and Hardwares Material: Aluminum Usage: For MICROHELI Frame - Blade 120S / S2..

  Included: 1 x Aluminum Tail Motor Mount - BLADE 120 S / S2 MH-120S125 1 x Carbon Rod Tail Boom - BLADE 120 S / S2 MH-120S025BC 1 x Carbon Fiber Vertical Fin - BLADE 120 S / S2 MH-120S064VR Usage: Use for BLADE 120 S / S2 Requires: Read and foll..

Includes: 1 Upper Bearing Hub and Hardwares Material: Aluminum Usage: For MICROHELI Frame - Blade 120S / S2..

The 1.5mm Carbon Tail Boom Support set is specifically designed and optimized for improvements in rigidity, durability, tail control performance and overall performance on the Walkera V120D02S helicopter. The 1.5mm Carbon Tail Boom Support set is an extremely efficient and excellent support set for the Tail Boom and the Frame with a significant..

The Aluminum Canopy Mount is optimized for rigidity and durability of the Blade 130 X/120 S helicopter. It is directly replaced the stock plastic. The new design provides the best rigidity from Aluminum material, the rigid platform and firm hold of canopy, the easy assembly installation and removal ever, without the fuss and bother. ..

Included:2 x Aluminum Landing Gear SupportHardwaresUsage:Use for MICROHELI Landing Gear on BLADE 130X and BLADE 120 S / S2..

The Aluminum Tail Boom Support Mount (RED) is specifically designed for improvements in rigidity, stability, durability and overall performance on the Walkera V120D02S helicopter.     Includes 1 x Aluminum Tail Boom Support Mount (RED) ..

..

The Aluminum/Carbon Fiber Landing Gear will bring your helicopter to a higher class and a cool new look. See and feel the difference. Make it stand out from the crowd!Included:1 x Aluminum/Carbon Fiber Landing Gear "A" Style w/ Battery MountUsage:Use for BLADE INFUSION 120Requires:Read and follow the Assembly Instruction ca..

..

Use for:BLADE INFUSION 120GOOSKY S1OMP Hobby M1 / EVO..

The CNC Aluminum Tail Boom is compatible and directly replaced the stock aluminum tail boom.Included:2 x Aluminum Tail Boom Usage:Use for BLADE INFUSION 120..

Featuring Microheli’s best designs, the CNC Triple Blades Conversion set is designed with material strength and precise CNC tolerances in mind, to optimize stability, durability, response and overall performance of the BLADE INFUSION 120 helicopter.Every detail of this Conversion set was scrutinized in terms of lift forces and energy consumption in..

   ..

Featuring Microheli’s best designs, the CNC Triple Blades Conversion set is designed with material strength and precise CNC tolerances in mind, to optimize stability, durability, response and overall performance of the BLADE INFUSION 120 helicopter.Every detail of this Conversion set was scrutinized in terms of lift forces and energy consumption in..

Featuring Microheli’s best designs, the CNC Triple Blades Conversion set is designed with material strength and precise CNC tolerances in mind, to optimize stability, durability, response and overall performance of the BLADE INFUSION 120 helicopter.Every detail of this Conversion set was scrutinized in terms of lift forces and energy consumption in..

Featuring Microheli’s best designs, the CNC Triple Blades Conversion set is designed with material strength and precise CNC tolerances in mind, to optimize stability, durability, response and overall performance of the BLADE INFUSION 120 helicopter.Every detail of this Conversion set was scrutinized in terms of lift forces and energy consumption in..

..

The Low Profile Carbon Fiber Landing Gear design with lower on the front and higher on the back to tilt your BLADE INFUSION 120 helicopter forward 5 degrees to avoid tail rotor blades strike during landing.The new stylish Low Profile Carbon Fiber Landing Gear will bring your helicopter to a higher class and a cool new look. See and feel t..

The design of the Aluminum Main Blade Grip was to optimize for rigidity, stability, durability and overall performance of the BLADE INFUSION 120 helicopter. It is lighter and directly replaced the stock plastic.Included:2 x Aluminum Main Blade GripHardwaresUsage:Use for BLADE INFUSION 120Requires:Read and follow the Assembly Instruction carefullyLo..

..

The Precision CNC Aluminum Main Rotor Hub is specifically designed with precise CNC tolerances and Aluminum material, to optimize for rigidity, stability, durability and overall performance of the BLADE 120 SR/S/S2 helicopter. This new design is optimized for minimum weight only 1.01g with Head Button (0.41g heavier than stock..