Hardware set for MH 180CFX Upgrades

The Hardware set for Microheli 180 CFX Upgrades is very strong & light. This set keeps the Microheli 180 CFX Upgrades very close to Motor, to maintain stock flying characteristics.

With the good quality Hardware set, it will give you the confidence needed for worry free flying. Each Hardware will be self tightening while the Motor is powered. Installation is quick & simple. No modifications necessary.

	Includes
	2 x M1.6x5mm Phillips Head Screw
	4 x M2x2mm Set Screw M2020SSS
	15 x M1.6x4mm Cap Screw M1640CSS
	10 x M1.6x4mm Phillips Head Screw
	3 x M1.6x3mm Phillips Head Screw
	8 x M1.6x3mm  Cap Screw
	2 x M1.6x6mm Phillips Head Screw M1660PSS
	1 x M1.6x8mm Phillips Head Screw M1680PSS
	1 x M1.6x8mm  Cap Screw M1680CSS
	4 x M1x2mm  Phillips Head Screw M1020PSS
	1 x M1.8x5mm  Hexagon Screw 1-72UNFx3 Stainless Steel (M1-72x3/16SS)
	10 x M1x3mm  Phillips Head Screw M1030PSS
	1 x M1.4x3mm  Phillips Head Screw M1430PSS
	3 x M1.4x5mm  Phillips Head Screw M1450PSS
	2 x M1.4x6mm  Phillips Head Screw M1460PSS
	4 x M1.2x2mm  Phillips Head Screw
	1 x M1.2x3mm  Phillips Head Screw M1230PSS
	2 x M1.2x5mm  Phillips Head Screw M1250PSS

	Features
	Very strong & light
	Keeps the Microheli 180 CFX Upgrades very close to Motor, to maintain stock flying characteristics
	Gives you the confidence needed for worry free flying
	Self tightening while the Motor is powered
	Installation is quick & simple. No modifications necessary

	Weight
	4.67g

	Usage
	For Microheli 180 CFX Upgrades

	Requires
	Loctite (#242 is recommended) is required to apply to all mechanical screws for safety precaution
	Basic hand tools